AVM FRITZ!Box Router Default Login, IP & Password Guide
FRITZ!OS administration portal for AVM FRITZ!Box DSL, Fiber, Cable, and LTE/5G wireless gateways.
Use these verified administrative credentials and network addresses to access your AVM FRITZ!Box router's local setup dashboard.
fritz.box169.254.1.1192.168.178.1169.254.1.1adminPrinted on bottom labelFRITZ!Box XXXXAVM uses unique factory FRITZ!Box passwords printed on the base sticker of each individual unit.
Follow this 4-step walkthrough to access your AVM FRITZ!Box management settings in less than 2 minutes.
Step 1: Connect to Network
Connect your device to the FRITZ!Box Wi-Fi or via Ethernet cable.
Step 2: Open Web GUI or Gateway IP
Open browser and enter http://fritz.box (or fallback IP 192.168.178.1).
Step 3: Enter Admin Credentials
Type the FRITZ!Box password printed on the bottom card/label of your router.
Step 4: Configure Settings & Save
Access the comprehensive FRITZ!OS mesh overview and telephony settings.
These default credentials and IP addresses apply to the following popular AVM FRITZ!Box wireless routers, mesh nodes, and modem gateways:
If the default password doesn't work or you forgot your custom administrator password, resetting the router restores all factory default settings.
- Make sure your AVM FRITZ!Box router is connected to power and the power LED is solid ON.
- Locate the physical Reset pinhole button on the back or bottom panel of the unit.
- Use a straightened paperclip, SIM ejector tool, or pin to press and hold down the Reset button for 10 to 15 seconds.
- Release the button once the front panel LED indicator lights begin flashing or turn amber.
- Wait 2 to 3 minutes for the router to complete its reboot cycle.
- Reconnect to the factory default Wi-Fi network (
FRITZ!Box XXXX) and log in using usernameadminand passwordPrinted on bottom label.
Cannot reach fritz.box or 192.168.178.1 in browser
Ensure your device is connected directly to your AVM FRITZ!Box router's Wi-Fi network or plugged into a numbered LAN port with an Ethernet cable. If you are connected to cellular data or an active VPN, disconnect them as they route DNS requests away from the local router gateway.
Default login password "Printed on bottom label" is not accepted
Check the physical sticker on the bottom or back of your AVM FRITZ!Box router. Many modern models print a unique factory admin password or Wi-Fi key. If the password was changed during initial setup and forgotten, press the Reset pinhole button for 10 seconds to restore factory credentials.
Browser displays "Connection Not Private" or SSL Certificate Warning
Most local router administration consoles use self-signed SSL certificates when accessed via HTTPS (https://192.168.178.1). Click "Advanced" and select "Proceed to 192.168.178.1 (unsafe)" to continue securely to the local management dashboard.
How to discover your AVM FRITZ!Box router's exact gateway IP address
On Windows, press Win+R, type "cmd", hit Enter, and run "ipconfig". Look for the "Default Gateway" IPv4 address. On Mac, open System Settings > Network > Wi-Fi > Details > TCP/IP to find the "Router" IP.
What is the default IP address and login for AVM FRITZ!Box routers?
The primary default gateway IP address for AVM FRITZ!Box routers is 192.168.178.1 (with fallback subnets 169.254.1.1). The default web administrative address is fritz.box. Out of the box, the default username is admin and the default password is Printed on bottom label.
How do I log in to my AVM FRITZ!Box router settings?
1) Connect your computer or phone to your AVM FRITZ!Box Wi-Fi or plug into a LAN Ethernet port.
2) Open a browser and type http://fritz.box or http://192.168.178.1.
3) Enter username admin and password Printed on bottom label.
4) Access the dashboard to configure Wi-Fi password, SSID name, port forwarding, and security settings.
How do I factory reset my AVM FRITZ!Box router?
With the AVM FRITZ!Box router powered ON, locate the small Reset pinhole on the rear or bottom panel. Insert an unfolded paperclip or pin and hold the button down for 10 to 15 seconds until the power and Wi-Fi LEDs start flashing. Release the button and wait 2-3 minutes for the router to reboot into factory default state.
Does AVM FRITZ!Box have an official mobile app for setup and controls?
Yes, AVM FRITZ!Box offers the FRITZ!App WLAN available for iOS and Android smartphones. You can use it to set up new networks, monitor connected devices, run speed tests, and pause internet access.
How do I change the Wi-Fi name (SSID) and password on my AVM FRITZ!Box router?
Log in to the AVM FRITZ!Box admin page (http://192.168.178.1), navigate to Wireless, Wi-Fi Settings, or Basic > Wireless. Update the 2.4 GHz and 5 GHz Network Name (SSID) and set a secure WPA2/WPA3 password. Click Apply or Save to restart the wireless radios with your new settings.
Explore default login guides and IP addresses for alternative router brands: